================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了使用PWM PWM2模式输出一路频率为40Hz占空比分别为60%的PWM波
形。

Function descriptions:
This example demonstrates the use of PWM PWM2 mode to output PWM wave 
with a frequency of 40Hz and a duty cycle of 60%, respectively.
================================================================================
测试环境：
测试用板：PY32F005_STK
MDK版本： 5.28
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32F005_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行
2. 使用逻辑分析仪观察引脚PA5的波形

Example execution steps:
1.Compile and download the program to the MCU and run it.
2.Use the logic analyzer to observe the waveform of pin PA5
================================================================================
注意事项：

Notes:

================================================================================